NICK K75
Installing the glossy ppf can be a great way to protect your vehicle's paint and finish while still retaining the original look. NICK FSD glossy ppf with the thickness of 7.5mil, transparent color, the aliphatic tpu mateial is Germany BASF, coat is hydrophilic coating. The glossy paint protection film can protect your car from damage.
Paint protection film is a good method to protect you car, so how to install a ppf in your car. Here are some steps for installing the glossy ppf.
First, clean your car, before installing the ppf, make sure your car is clean and free from any dirt or debris.
Second, measure the length and width of your car and the areas you would like to cover. Make sure you have enough material to cover the entire surface.
Third, cut the film, once you have your measurements, cut the film to the size and shape needed for each section of your car. It can be helpful to use a cutting tool, like a scalpel, to ensure accurate cuts.
Fourth, apply the film, start with a small section of your car and peel a small portion of the backing off the film. Apply the exposed section to your car and begin slowly peeling the backing off, while pressing down the wrap onto the surface with your fingers. Work with patience and preferably with an assistant.
Fifth, smooth out wrinkles, after the film applied to your car, use a squeegee to smooth out any wrinkles or air bubbles. Make sure to work from the middle to the edges to avoid creating additional wrinkles.
Sixth,trim the edges, after the film has been applied and smoothed out, carefully trim the edges with a sharp blade. Take your time and make sure the edges are straight and even.
Seventh, finish, after the edges are trimmed, use a heat gun to activate the wrap. This will help the material adhere to the surface of your car. Lastly, wash and wax your car to give it a shiny and glossy finish.
Installing a paint protection film can not only will it protect your car, it will also keep it looking brand new for years to come.
